manualshive.com logo in svg

Allied Telesis AT-S63, Features Manual

The Allied Telesis AT-S63 is a high-performance network switch that offers advanced features and seamless connectivity. For easy setup and configuration, download the free Cli User's Manual from our website manualshive.com. This comprehensive manual guides you through every aspect of the product, ensuring optimal performance and reliability.

Share
Download
background image

AT-S63 Management Software Features Guide

17

Table 110: Support for the Secure Shell Protocol  .............................................................................................................438
Table 111:  Management Interfaces for the Secure Shell Protocol ...................................................................................438
Table 112: Support for the  and RADIUS Protocols ..........................................................................................448
Table 113:  Management Interfaces for the  and RADIUS Protocols  ...............................................................448
Table 114: Support for the Management Access Control List ...........................................................................................456
Table 115:  Management Interfaces for the Management Access Control List  .................................................................456
Table 116: Access Control Lists (AtiStackSwitch MIB) ......................................................................................................514
Table 117: CoS Scheduling (AtiStackSwitch MIB)  ............................................................................................................515
Table 118: CoS Priority to Egress Queue Mappings (AtiStackSwitch MIB)  ......................................................................515
Table 119: CoS Packet Weights of Egress Queues (AtiStackSwitch MIB)  .......................................................................515
Table 120: CoS Port Settings (AtiStackSwitch MIB) ..........................................................................................................515
Table 121: Date, Time, and SNTP Client (AtiStackSwitch MIB) ........................................................................................516
Table 122: LAN Address and Subnet Mask (AtiStackSwitch MIB) ....................................................................................517
Table 123: Denial of Service Defenses (AtiStackSwitch MIB) ...........................................................................................517
Table 124: Switch Mode and Discovery (AtiStackInfo MIB) ..............................................................................................518
Table 125: Switches of an Enhanced Stack (AtiStackInfo MIB) ........................................................................................518
Table 126: GVFP Switch Configuration (AtiStackSwitch MIB)  ..........................................................................................519
Table 127: GVRP Port Configuration (AtiStackSwitch MIB)  ..............................................................................................519
Table 128: GVRP Counters (AtiStackSwitch MIB)  ............................................................................................................519
Table 129: MAC Address Table (AtiStackSwitch MIB)  ......................................................................................................521
Table 130: Static MAC Address Table (AtiStackSwitch MIB)  ............................................................................................521
Table 131: Management Access Control List Status (AtiStackSwitch MIB)  ......................................................................522
Table 132: Management Access Control List Entries (AtiStackSwitch MIB)  .....................................................................522
Table 133: System Reset (AtiStackSwitch MIB) ................................................................................................................523
Table 134: Local Interface (AtiStackSwitch MIB) ...............................................................................................................523
Table 135: Saving the Configuration and Returning to Default Settings (AtiStackSwitch MIB) .........................................523
Table 136: Port Mirroring (AtiStackSwitch MIB)  ................................................................................................................524
Table 137: Flow Groups (AtiStackSwitch MIB) ..................................................................................................................525
Table 138: Traffic Classes (AtiStackSwitch MIB)  ..............................................................................................................525
Table 139: Policies (AtiStackSwitch MIB) ..........................................................................................................................526
Table 140:  Port Configuration and Status (AtiStackSwitch MIB)  ......................................................................................527
Table 141: Spanning Tree (AtiStackSwitch MIB) ...............................................................................................................528
Table 142:  Static Port Trunks (AtiStackSwitch MIB) .........................................................................................................529
Table 143: VLAN Table (AtiStackSwitch MIB) ...................................................................................................................530
Table 144: VLAN Table (AtiStackSwitch MIB) ...................................................................................................................530
Table 145: VLAN Mode and Uplink Port (AtiStackSwitch MIB) .........................................................................................530
Table 146: PVID Table (AtiStackSwitch MIB) ....................................................................................................................531

Summary of Contents for AT-S63



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-S63

Cabletron Systems CSMIM-T1 Quick Start Manual preview
CSMIM-T1
Brand: Cabletron Systems Pages: 16
Garmin GPSMAP GPSMAP 196 Getting Started preview
GPSMAP GPSMAP 196
Brand: Garmin Pages: 4
Garmin MapSource Owner'S Manual preview
MapSource
Brand: Garmin Pages: 2
Crestron CRESTRON-APP-SSTV Operations & Installation Manual preview
CRESTRON-APP-SSTV
Brand: Crestron Pages: 28
Symantec ALTIRIS 6 INVENTORY SOLUTION Datasheet preview
ALTIRIS 6 INVENTORY SOLUTION
Brand: Symantec Pages: 2
Ulead GIF ANIMATOR 4.0 User Manual preview
GIF ANIMATOR 4.0
Brand: Ulead Pages: 64
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5 Installation Manual preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.5
Brand: Red Hat Pages: 110
F-SECURE POLICY MANAGER 9.0 Administrator'S Manual preview
POLICY MANAGER 9.0
Brand: F-SECURE Pages: 102
Intel ITANIUM ARCHITECTURE Manual preview
ITANIUM ARCHITECTURE
Brand: Intel Pages: 604
GRASS VALLEY AURORA INGEST 7 Datasheet preview
AURORA INGEST 7
Brand: GRASS VALLEY Pages: 4
GRASS VALLEY Aurora Browse Upgrade Instructions preview
Aurora Browse
Brand: GRASS VALLEY Pages: 42
MACROMEDIA FLEX BUILDER-USING FLEX BUILDER Use Manual preview
FLEX BUILDER-USING FLEX BUILDER
Brand: MACROMEDIA Pages: 158
Lexicon PCM NATIVE DUAL DELAY Owner'S Manual preview
PCM NATIVE DUAL DELAY
Brand: Lexicon Pages: 36
Lexicon PCM NATIVE CHORUS Owner'S Manual preview
PCM NATIVE CHORUS
Brand: Lexicon Pages: 36
TC Electronic VoiceStrip Manual preview
VoiceStrip
Brand: TC Electronic Pages: 8
KIP PrintNET 7.X Enterprise Operation Manual preview
PrintNET 7.X Enterprise
Brand: KIP Pages: 37
Yamaha mLAN mLAN Driver Owner'S Manual preview
mLAN mLAN Driver
Brand: Yamaha Pages: 16
Epson PowerLite 95 Specifications preview
PowerLite 95
Brand: Epson Pages: 4

Brands by name

Popular brands

Load more brands