Allied Telesis AT-S63 Features Manual Download Page 118 | Manualshive

Page: 118 / 538

background image

Chapter 9: File System

118

Section II: Advanced Operations

Overview

The AT-9400 Switch has a file system in flash memory for storing system
files. You can view a list of the files as well as copy, rename, and delete
files. For those AT-9400 Switches that support a compact flash memory
card, you can perform the same functions on the files stored on a flash
card, as well as copy files between the switch’s file system and a flash
card.

The file system supports the following file types:

Configuration files

Public keys

CA and self-signed certificates

Certificate enrollment requests

Event logs

For an explanation of boot configuration files, refer to “Configuration Files”
on page 48 and “Stack Configuration Files” on page 71.

Public encryption keys, public certificates, and certificate enrollment
request files are related to the Secure Sockets Layer (SSL) certificates
feature described in Chapter 35, “Encryption Keys” on page 411 and
Chapter 36, “PKI Certificates and SSL” on page 421. Refer to those
chapters for background information on those files.

Note

The certificate file, certificate enrollment request file, and key file are
supported only on the version of AT-S63 Management Software that
features SSL and PKI security.

Note

The file system may contain one or more ENC.UKF files. These are
encryption key pairs. These files cannot be deleted, copied, or
exported from the file system. For further information, refer to
Chapter 35, “Encryption Keys” on page 411.

«
...
116
117
118
119
120
...
»

Summary of Contents for AT-S63



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-S63

Brand: F-SECURE Pages: 18

CLX 6210FX - Color Laser - All-in-One

Brand: Samsung Pages: 65

4116 - SCX B/W Laser

Brand: Samsung Pages: 16

FLEXXPECT-PHARMA

Brand: Omron Pages: 2

20032623 - Endpoint Protection Small Business Edition

Brand: Symantec Pages: 351

Brand: Barco Pages: 22

Quality Monitoring

Brand: Nortel Pages: 22

ANTI-VIRUS 5.5 - FOR NOVELL NETWARE

Brand: KAPERSKY Pages: 134

INDeX Agent Assist

Brand: Avaya Pages: 12

8.5 EMAIL SERVER EDITION - V 85.4

Brand: AVG Pages: 52

Brand: Yellowtec Pages: 124

POLICY MANAGER 7.0 -

Brand: F-SECURE Pages: 241

Brand: MACROMEDIA Pages: 830

CLUSTER SUITE FOR ENTERPRISE LINUX 5.1

Brand: Red Hat Pages: 160

9235 - Coolscan III

Brand: Nikon Pages: 153

Brand: Cyber Sciences Pages: 2

POLICY MANAGER 8.0

Brand: F-SECURE Pages: 221

Brand: Nikon Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands