manualshive.com logo in svg

Allied Telesis AT-S63, Features Manual

The Allied Telesis AT-S63 is a high-performance network switch that offers advanced features and seamless connectivity. For easy setup and configuration, download the free Cli User's Manual from our website manualshive.com. This comprehensive manual guides you through every aspect of the product, ensuring optimal performance and reliability.

Share
Download
background image

AT-S63 Management Software Features Guide

Section I: Basic Operations

65

Enhanced Stacking

If you have prior experience with Allied Telesis products, you might 
already be familiar with a feature that happens to have a similar name to 
the feature discussed in this manual. The feature is 

enhanced stacking

 

and what it allows you to do is manage the different Allied Telesis switches 
in your network from one management session by redirecting the 
management session from switch to switch. This can save you time as 
well as reduce the number of IP addresses that you have to assign to the 
managed devices in your network.

It is important not to confuse the stacking feature explained in this guide 
with enhanced stacking because they have no functional or operational 
similarities. Their principal differences are outlined here.

In an AT-9400Ts Stack:

ˆ

The AT-9400Ts Gigabit Ethernet Switches operate as a single, logical 
unit in which functions such as static port trunks and port mirrors, are 
able to span all the devices in the stack.

ˆ

The switches are managed as a unit.

ˆ

The switches in a stack have the same MAC address tables.

ˆ

The switches must be installed in the same equipment rack.

ˆ

The switches are linked together with the AT-StackXG Stacking 
Module.

ˆ

The stacking feature is only supported on the AT-9424Ts, AT-9424Ts/
XP, and AT-9448Ts/XP Switches.

In enhanced stacking:

ˆ

The AT-9400 Gigabit Ethernet Switches operate as independent units.

ˆ

Though the switches of an enhanced stack can be accessed from the 
same management session, they must still be configured individually.

ˆ

Each switch maintains its own MAC address table.

ˆ

The devices can be located across a large geographical area.

ˆ

The switches are connected together with a common virtual LAN.

ˆ

Enhanced stacking is supported by all of the AT-9400 Gigabit Ethernet 
Switches, as well as other Allied Telesis managed products.

The AT-9400Ts Stack does not support enhanced stacking. A stack can 
be managed locally through the Terminal Port on the master switch of the 
stack or remotely with a Telnet or SSH client or a web browser.

Summary of Contents for AT-S63



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-S63

CA BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9... Manual preview
BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9...
Brand: CA Pages: 69
Savin RW-470 Clients Installation Manual preview
RW-470 Clients
Brand: Savin Pages: 71
CAKEWALK Cakewalk SONAR User Manual preview
Cakewalk SONAR
Brand: CAKEWALK Pages: 610
RGB Spectrum DGy 201x User Manual preview
DGy 201x
Brand: RGB Spectrum Pages: 158
Tech Source RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND Brochure preview
RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND
Brand: Tech Source Pages: 2
LEI Extras MapCreate Canada 6.3 Topo Addendum Manual preview
MapCreate Canada 6.3 Topo Addendum
Brand: LEI Extras Pages: 1
Oracle B31679-01 Installation Manual preview
B31679-01
Brand: Oracle Pages: 130
Autodesk 18506-091462-9305 - Architectural Desktop 2006 Update Manual preview
18506-091462-9305 - Architectural Desktop 2006
Brand: Autodesk Pages: 290
MACROMEDIA HOMESITE Using Manual preview
HOMESITE
Brand: MACROMEDIA Pages: 358
Tandem ENFORM 058057 Reference Manual preview
ENFORM 058057
Brand: Tandem Pages: 312
Avocent DSView Installer/User Manual preview
DSView
Brand: Avocent Pages: 358
Olympus Auto-Connect Connection Manual preview
Auto-Connect
Brand: Olympus Pages: 9
AVG AVGPREP 9.0 - REV 90.2 Manual preview
AVGPREP 9.0 - REV 90.2
Brand: AVG Pages: 4
AVG AVG LINKSCANNER FOR MAC User Manual preview
AVG LINKSCANNER FOR MAC
Brand: AVG Pages: 31
AVG Anti-Virus 7.1 User Manual preview
Anti-Virus 7.1
Brand: AVG Pages: 47
ATI Technologies HD2600XT - Radeon 512MB Pcie User Manual preview
HD2600XT - Radeon 512MB Pcie
Brand: ATI Technologies Pages: 4
F-SECURE PSB E-MAIL AND SERVER SECURITY Started Manual preview
PSB E-MAIL AND SERVER SECURITY
Brand: F-SECURE Pages: 15
McAfee VirusScan Datasheet preview
VirusScan
Brand: McAfee Pages: 2

Brands by name

Popular brands

Load more brands