manualshive.com logo in svg

Allied Telesis AT-S63, Features Manual

The Allied Telesis AT-S63 is a high-performance network switch that offers advanced features and seamless connectivity. For easy setup and configuration, download the free Cli User's Manual from our website manualshive.com. This comprehensive manual guides you through every aspect of the product, ensuring optimal performance and reliability.

Share
Download
background image

AT-S63 Management Software Features Guide

11

Chapter 38:  and RADIUS Protocols 

......................................................................................... 447

Supported Platforms....................................................................................................................................... 448
Overview......................................................................................................................................................... 449
Guidelines....................................................................................................................................................... 451

Chapter 39: Management Access Control List 

......................................................................................... 455

Supported Platforms....................................................................................................................................... 456
Overview......................................................................................................................................................... 457
Parts of a Management ACE.......................................................................................................................... 458

IP Address................................................................................................................................................ 458
Mask......................................................................................................................................................... 458
Application................................................................................................................................................ 458

Guidelines....................................................................................................................................................... 459
Examples........................................................................................................................................................ 460

Appendix A: AT-S63 Management Software Default Settings 

................................................................ 463

Address Resolution Protocol Cache............................................................................................................... 465
Boot Configuration File ................................................................................................................................... 466
BOOTP Relay Agent ...................................................................................................................................... 467
Class of Service.............................................................................................................................................. 468
Denial of Service Defenses ............................................................................................................................ 469
802.1x Port-Based Network Access Control .................................................................................................. 470
Enhanced Stacking......................................................................................................................................... 472
Ethernet Protection Switching Ring (EPSR) Snooping................................................................................... 473
Event Logs...................................................................................................................................................... 474
GVRP ............................................................................................................................................................. 475
IGMP Snooping .............................................................................................................................................. 476
Internet Protocol Version 4 Packet Routing.................................................................................................... 477
MAC Address-based Port Security................................................................................................................. 478
MAC Address Table ....................................................................................................................................... 479
Management Access Control List................................................................................................................... 480
Manager and Operator Account ..................................................................................................................... 481
Multicast Listener Discovery Snooping........................................................................................................... 482
Public Key Infrastructure ................................................................................................................................ 483
Port Settings ................................................................................................................................................... 484
RJ-45 Serial Terminal Port ............................................................................................................................. 485
Router Redundancy Protocol Snooping ......................................................................................................... 486
Server-based Authentication (RADIUS and )................................................................................. 487

Server-based Authentication.................................................................................................................... 487
RADIUS Client ......................................................................................................................................... 487
 Client ...................................................................................................................................... 487

Simple Network Management Protocol .......................................................................................................... 488
Simple Network Time Protocol ....................................................................................................................... 489
Spanning Tree Protocols (STP, RSTP, and MSTP) ....................................................................................... 490

Spanning Tree Switch Settings ................................................................................................................ 490
Spanning Tree Protocol ........................................................................................................................... 490
Rapid Spanning Tree Protocol ................................................................................................................. 490
Multiple Spanning Tree Protocol .............................................................................................................. 491

Secure Shell Server........................................................................................................................................ 492
Secure Sockets Layer .................................................................................................................................... 493
System Name, Administrator, and Comments Settings ................................................................................. 494
Telnet Server .................................................................................................................................................. 495
Virtual Router Redundancy Protocol .............................................................................................................. 496
VLANs ............................................................................................................................................................ 497
Web Server..................................................................................................................................................... 498

Summary of Contents for AT-S63



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-S63

Panasonic PT-D10000 Series Setup And Operation Manual preview
PT-D10000 Series
Brand: Panasonic Pages: 37
F-SECURE MOBILE SECURITY FOR WINDOWS MOBILE - Quick Manual preview
MOBILE SECURITY FOR WINDOWS MOBILE -
Brand: F-SECURE Pages: 4
F-SECURE MOBILE SECURITY FOR UIQ - Quick Manual preview
MOBILE SECURITY FOR UIQ -
Brand: F-SECURE Pages: 3
F-SECURE MOBILE SECURITY 6 FOR WINDOWS MOBILE - Quick Manual preview
MOBILE SECURITY 6 FOR WINDOWS MOBILE -
Brand: F-SECURE Pages: 5
F-SECURE MOBILE SECURITY 6 FOR S60 - Quick Manual preview
MOBILE SECURITY 6 FOR S60 -
Brand: F-SECURE Pages: 5
F-SECURE CLIENT SECURITY 7.00 Administrator'S Manual preview
CLIENT SECURITY 7.00
Brand: F-SECURE Pages: 315
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00 Deployment Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00
Brand: F-SECURE Pages: 115
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 - Administrator'S Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -
Brand: F-SECURE Pages: 349
F-SECURE ANTI-VIRUS - FOR MICROSOFT EXCHANGE Administrator'S Manual preview
ANTI-VIRUS - FOR MICROSOFT EXCHANGE
Brand: F-SECURE Pages: 224
TANDBERG Codian Remote Management API Reference Manual preview
Codian Remote Management API
Brand: TANDBERG Pages: 66
MACROMEDIA BREEZE-MANAGING EXTERNAL BREEZE REPORTS Manual preview
BREEZE-MANAGING EXTERNAL BREEZE REPORTS
Brand: MACROMEDIA Pages: 18
MacroSystem Digital Video DVD-Arabesk 2 User Manual preview
DVD-Arabesk 2
Brand: MacroSystem Digital Video Pages: 28
AMX IREDIT V1.2 Instruction Manual preview
IREDIT V1.2
Brand: AMX Pages: 54
Honeywell Dolphin 7200 Software Manual preview
Dolphin 7200
Brand: Honeywell Pages: 2
Honeywell INTEGRA User Manual preview
INTEGRA
Brand: Honeywell Pages: 14
Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual preview
7850LP-I1-5210E - Hand Held Products Dolphin 7850
Brand: Honeywell Pages: 36
Honeywell Dolphin Demos User Manual preview
Dolphin Demos
Brand: Honeywell Pages: 46
Honeywell RAPID EYE MULTI-MEDIA Operator'S Manual preview
RAPID EYE MULTI-MEDIA
Brand: Honeywell Pages: 144

Brands by name

Popular brands

Load more brands