manualshive.com logo in svg

Allied Telesis AT-S63, Features Manual

The Allied Telesis AT-S63 is a high-performance network switch that offers advanced features and seamless connectivity. For easy setup and configuration, download the free Cli User's Manual from our website manualshive.com. This comprehensive manual guides you through every aspect of the product, ensuring optimal performance and reliability.

Share
Download
background image

AT-S63 Management Software Features Guide

49

Redundant Twisted Pair Ports

Several AT-9400 Switches have twisted pair ports and GBIC or SFP slots 
that are paired together. The twisted pair ports are identified with the letter 
“R” for “Redundant” as part of their number on the front faceplate of the 
unit. The switch models with paired ports and slots are listed in Table 20.

Follow these guidelines when using these ports and slots:

ˆ

Only one port in a pair — either the twisted pair port or the companion 
GBIC or SFP module — can be active at a time.

ˆ

The twisted pair port is the active port when its GBIC or SFP slot is 
empty, or when a GBIC or SFP module is installed but has not 
established a link to an end node.

ˆ

The twisted pair port automatically changes to the redundant status 
mode when a GBIC or SFP module establishes a link with an end 
node.

ˆ

A twisted pair port automatically transitions back to the active status 
when the link is lost on the GBIC or SFP module.

ˆ

A twisted pair port and a GBIC or SFP module share the same 
configuration settings, including port settings, VLAN assignments, 
access control lists, and spanning tree.

ˆ

The only exception to shared settings is port speed. If you disable 
Auto-Negotiation on a twisted pair port and set the speed and duplex 
mode manually, the speed reverts to Auto-Negotiation when a GBIC or 
SFP module establishes a link with an end node.

Table 20  Twisted Pair Ports Matched with GBIC and SFP Slots

Model

Ports and Slots

AT-9424T/GB

23R with GBIC slot 23
24R with GBIC slot 24

AT-9424T/SP

23R with SFP slot 23
24R with SFP slot 24

AT-9424T, AT-9424T/POE, 
AT-9424Ts and 
AT-9424Ts/XP

21R with SFP slot 21
22R with SFP slot 22
23R with SFP slot 23
24R with SFP slot 24

AT-9448T/SP

45R with SFP slot 45
46R with SFP slot 46
47R with SFP slot 47
48R with SFP slot 48

Summary of Contents for AT-S63



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-S63

Mitsubishi DX-PC3 Instruction Manual preview
DX-PC3
Brand: Mitsubishi Pages: 38
TANDBERG MPS API Interface D13639 User Manual preview
MPS API Interface D13639
Brand: TANDBERG Pages: 84
Novell ZENworks Network Access Control 5.0 User Manual preview
ZENworks Network Access Control 5.0
Brand: Novell Pages: 534
KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER User Manual preview
ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER
Brand: KAPERSKY Pages: 295
MACROMEDIA FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH Manual preview
FLASH 8-LEARNING ACTIONSCRIPT 2.0 IN FLASH
Brand: MACROMEDIA Pages: 830
Roxio Toast 6 Titanium Getting Started Manual preview
Toast 6 Titanium
Brand: Roxio Pages: 132
Avaya P130 SMON User Manual preview
P130 SMON
Brand: Avaya Pages: 160
Symantec BACKUP EXEC 11D Quick Installation Manual preview
BACKUP EXEC 11D
Brand: Symantec Pages: 18
Symantec ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S Release Note preview
ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S
Brand: Symantec Pages: 14
Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 Manual preview
ALTIRIS DEPLOYMENT SOLUTION 7.1
Brand: Symantec Pages: 90
GameShark Media Manager Instruction Manual preview
Media Manager
Brand: GameShark Pages: 15
F-SECURE MOBILE SECURITY 3.1 FOR S60 User Manual preview
MOBILE SECURITY 3.1 FOR S60
Brand: F-SECURE Pages: 31
3Com SUPERSTACK 3 WEBCACHE 3000 User Manual preview
SUPERSTACK 3 WEBCACHE 3000
Brand: 3Com Pages: 362
Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD User Manual preview
00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD
Brand: Autodesk Pages: 2268
Qlogic Data Migration Service User Manual preview
Data Migration Service
Brand: Qlogic Pages: 162
Tascam GigaStudio User Manual preview
GigaStudio
Brand: Tascam Pages: 210
Samsung 3561ND - B/W Laser Printer Manual preview
3561ND - B/W Laser Printer
Brand: Samsung Pages: 30
Waves The King's User Manual preview
The King's
Brand: Waves Pages: 16

Brands by name

Popular brands

Load more brands