manualshive.com logo in svg

AJA FS2, Installation And Operation Manual, Page: 9 / 120

Share
Download
AJA FS2 Installation And Operation Manual Download Page 9

FS2 Frame Synchronizer/Converter v3.0 9 

www.aja.com

 

•  Use the HDMI input and a DVI-to-HDMI cable to scan-convert popular 

computer video formats to SD or HD, including full proc-amp functionality and 

aspect ratio adjustment.

•  HD sidebar keying including using both SD video and SD sidebar graphics 

(analog or digital), upconverting both, and combining—all in the FS2. 

Video Format Conversion

The FS2 can convert almost any input format to nearly any output format, as long 

as the frame rates are of the same family. The three families are: 

•  59.94/29.97/23.98
•  50/25
•  60/30/24

Available input and output formats are listed later in this appendix. 

Conversion Exceptions 

•  The following frame rates are not supported for input or output: 

•  720p23.98/24/25/29.97/30. 

•  The FS2 cannot convert a 29.97 or 59.97 input to 23.98 Hz. 
•  The FS2 cannot convert a 30 Hz or 60 Hz input to 24 Hz. 
•  Outputs of 23.98 or 24 Hz can be derived only from 23.98 or 24 Hz inputs.
•  Component I/O does not support 1080p. 
•  The FS2 does not support reverse 3:2 pulldown. 
•  The FS2 does not accept or produce 4:4:4 YCbCr, RGB, or XYZ inputs or 

outputs. 

•  The FS2 does not accept or produce YCbCr 4:2:2 12-bit inputs or outputs. 
•  The FS2 does not support embedded audio output for the following formats:

•  2K1080p 29.97 or 2K1080p 30 
•  2K1080p 59.94 or 2K1080p 60 when 3G Config is set to 3 Gb Level B or 1.5 Gb 

DualLink. 

•  The FS2 does not convert NTSC to PAL-M, or vice versa. 

FS2 Control 

FS2 operation can be monitored and changed in a number of ways. Feature sets 

in each of the control methods vary, although the front panel and web browser 

interfaces offer many of the same features. 

Front Panel Control

The FS2 front panel offers the most direct control, ideal for use in machine rooms 

or wherever quick changes and status checks must be made. The buttons and 

knobs control menus in the display, allowing you to fully configure the system 

according to your purposes. You can control inputs, outputs, processing paths, 

keying, and much more. 

Remote Web Browser Control

The FS2 internally contains an optimized web server that allows remote 

monitoring and parameter setting via an Ethernet 10/100/1000 network-attached 

computer running a web-browser. Networks can be closed local area networks, 

a straight computer-to-FS2 cable, or for greatest flexibility, exposed through 

a firewall to a broadband WAN. From a network-connected computer you can 

Summary of Contents for FS2

























































































































Reviews:

No comments