manualshive.com logo in svg

AJA FS2, Installation And Operation Manual, Page: 4 / 120

Share
Download
AJA FS2 Installation And Operation Manual Download Page 4

FS2 Frame Synchronizer/Converter v3.0 4 

www.aja.com

 

GPI Connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
FS2 Audio Level Choices—Pro or Consumer, US or EBU  . . . . . . . . . . . . 32
Computer Video Formats.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   33
Physical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Menu Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Scaling.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   34
Genlocking .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   34
Getting Your Computer Working with the FS2 . . . . . . . . . . . . . . . . . . 34

Chapter 4 – Display Menus . . . . . . . . . . . . . . . . . . . . . . . . . 36

Controlling the FS2 via Front Panel Display Menus . . . . . . . . . . . . . . . . . 36

Parameter Menus.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   36
Menu Group Buttons  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
SELECT and ADJUST Knobs.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   37

Menu Operation Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Status Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Simple Menus: Config Format Alarm Filters . . . . . . . . . . . . . . . . . . . . 37
Multiple Parameter Menus: Video 1 ProcAmp.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   38
Multiple Field Parameters: IP Address .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   39

STATUS Menu Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

S.1 I/O Status .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   40
S.2 Vid1 Format Status.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   40
S.3 Vid1 Format Alarm Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
S.4 Vid2 Format Status.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   41
S.5 Vid2 Format Alarm Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
S.6 Output Status .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   41
S.7 Power/Temp Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
S.8 Caption Status  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
S.9 Dolby Status .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   42
S.10 Dolby Framer Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
S.11 System Name  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

REMOTE Menu Group.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   42

1 Remote Control .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   42
1.1 Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2.1–4 GPI IN 1–4 Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3.1–4 GPI 1–4 OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Interaction of Presets and GPIs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

CONFIG Menu Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

1 System Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
2.1 IP Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.2 IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.3 Subnet Mask  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.4 Default Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3 MAC Address (view only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
SNMP Menu Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5 Power Supply Alarm .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   46
6.1 Vid1 Format Alarm .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   46
6.2 Vid2 Format Alarm.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   47
7 Reference Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
8 Hidden Menus.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   47
9 Screen Saver .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   47
10 Display Intensity.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   47
11 Fan Speed.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   47
12 Serial Number (view only).   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   48
13 Software Version (view only).   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   48
14 Reboot.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   48

PRESET Menu Group  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

1 Factory Preset .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   48
1.1-1.40 Presets #1-#40.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   49
Interaction of Presets and GPIs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

SYSTEM Menu Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Summary of Contents for FS2

























































































































Reviews:

No comments