FS2 Frame Synchronizer/Converter v3.0 29 www.aja.com
Figure 6. Setting FS2 Static IP Address
Using Ping to Test the Network Connection
If you have connected the FS2 to a computer and set up the IP address and still do
not see the FS2 screens in your browser, you can ping the network to verify the
connection. Simply run the Ping utility from a Mac OS X or Windows PC computer
attached directly or on the same LAN as the FS2 as described below:
Mac Ping Procedure
1. Find the Utilities Folder inside of the Applications Folder.
2. Locate the “Terminal” utility application and double-click it.
3. On the FS2, select the CONFIG button and go to parameter menu 2.2 to read
the IP address.
4. At the Mac terminal prompt, enter ping and the IP address noted in step 3.
For example: ping 192.168.0.2
5. If successful, the ping utility will respond that packets were sent, received
and how long it took. For example:
64 bytes from 192.168.0.2: icmp_seq=0 ttl=64 time=0.590 ms