manualshive.com logo in svg

AJA FS2, Installation And Operation Manual, Page: 40 / 120

Share
Download
AJA FS2 Installation And Operation Manual Download Page 40

FS2 Frame Synchronizer/Converter v3.0 40 www.aja.com

 

STATUS Menu Group

The Status Menu Group contains a series of Status display pages that you can 

scroll using the SELECT knob. The various Status pages are actually just displays, 

not menus, since they don’t include menu numbers or editable values. The 

ADJUST knob doesn’t affect the Status display pages.
When you press the STATUS button, the display shows the first menu unless there 

is an active alarm. If an alarm is active, the relevant alarm status page is displayed 

first. If more than one alarm is active, the highest priority alarm page is displayed 

first. 

NOTE:  When displaying video format status, the following convention differentiates 

between SMPTE video formats (broadcast) and computer (VESA/DVI) formats 

(non-broadcast formats originating from a computer). The SMPTE formats are 

shown as height (in lines), scan-format (progressive or interlaced), and frame-

rate, such as 1080i59. The VESA formats are shown as a size only, with an x in the 

middle, such as 640x480.

S.1 I/O Status

This menu shows the current primary settings for Processors 1 and 2. 

Display

Description

IN1 

Sel Video 

Format

OUT1 

Sel Video 

Audio

IN2 

Sel Video 

Format

OUT2 

Sel Video 

Audio

Processor 1 selected video input and detected format.

Processor 1 video output format and selected audio input.

Processor 2 selected video input and detected format.

Processor 2 video output format and selected audio input.

S.2 Vid1 Format Status

This menu shows the current primary settings for Processor 1. 

Display

Description

VID1 

Input Source 

Format

BKGD 

Backgd Source 

GEN 

Genlock Source 

Format

OUT  

Format

Selected Processor 1 video input source and format.

Selected Background video source.

Selected Genlock source and format.

Selected Processor 1 output format.

S.3 Vid1 Format Alarm Status

This menu shows the Processor 1 alarm status. Absence of alarm shows as OK. If 

selections are incompatible, the status of the affected signal shows incompat. 

Display

Description

VID1 

Input Source 

Status

BKGD 

Backgd Source 

Status

GEN 

Genlock Source 

Status

OUT  

Status

Selected Processor 1 video input source alarm status.

Selected Background video source alarm status.

Selected Genlock source alarm status.

Selected Processor 1 output format/alarm status.

Summary of Contents for FS2

























































































































Reviews:

No comments