AJA FS2 Installation And Operation Manual Download Page 3

Page: 3 / 120

FS2 Frame Synchronizer/Converter v3.0 3

www.aja.com

Contents

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Contacting AJA Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Chapter 1 – Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

FS2 Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front Panel Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Web Browser Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
GPI Inputs and Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SNMP Interface Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Optional FS2 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Fiber I/O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Dolby E Decoder Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Technical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Video Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Audio Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

In This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2 – Controls, Indicators, and Connections . . . . . . . . . . 13

Front Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Alphanumeric Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Pushbuttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Control Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Incompatibility Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Rear Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
About Inputs and Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Chapter 3 – Installation & Configuration . . . . . . . . . . . . . . . . 22

Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Installation Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Shipping Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Installing Optional Fiber Optic I/O Modules.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   24
Installing Optional Cards.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   24
FS2 Chassis Installation .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   25

Physical Requirements for Mounting the Chassis. . . . . . . . . . . . . . . . . 25
Power Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

FS2 Default Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Networking Using DHCP or Default Static IP.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   27
Networking the FS2 Using Your Own Static IP.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   28
Using Ping to Test the Network Connection .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   29

Web Browser Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Software Update Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Download the Latest FS2 Software . . . . . . . . . . . . . . . . . . . . . . . . . 30
Unpack the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Uploading and Installing the Software to the FS2 . . . . . . . . . . . . . . . . 31

System Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

System Video/Audio Cable Connections . . . . . . . . . . . . . . . . . . . . . . 32

Summary of Contents for FS2

























































































































Search results

Summary of Contents for FS2

Reviews:

AJA FS2, Installation And Operation Manual, Page: 3 / 120

Search results

Summary of Contents for FS2

Reviews: