FS2 Frame Synchronizer/Converter v3.0 77 www.aja.com
in the following table. The default selections are AES Ch1/2–AES 15/16 for Audio
Output Channels 1/2–15/16, respectively.
Available Selections: AES Ch1/2 (default)
AES Ch3/4 (default)
AES Ch5/6 (default)
AES Ch7/8 (default)
AES Ch9/10 (default)
AES Ch11/12 (default)
AES Ch13/14 (default)
AES Ch15/16 (default)
Analog Ch1/2
Analog Ch3/4
Analog Ch5/6
Analog Ch7/8
Analog Ch1/2
Analog Ch3/4
Analog Ch5/6
Analog Ch7/8
SDI 1 Ch1/2
SDI 1 Ch3/4
SDI 1 Ch5/6
SDI 1 Ch7/8
SDI 1 Ch9/10
SDI 1 Ch11/12
SDI 1 Ch13/14
SDI 1 Ch15/16
SDI 2 Ch1/2
SDI 2 Ch3/4
SDI 2 Ch5/6
SDI 2 Ch7/8
SDI 2 Ch9/10
SDI 2 Ch11/12
SDI 2 Ch13/14
SDI 2 Ch15/16
Fiber 1 Ch1/2
Fiber 1 Ch3/4
Fiber 1 Ch5/6
Fiber 1 Ch7/8
Fiber 1 Ch9/10
Fiber 1 Ch11/12
Fiber 1 Ch13/14
Fiber 1 Ch15/16
Fiber 2 Ch1/2
Fiber 2 Ch3/4
Fiber 2 Ch5/6
Fiber 2 Ch7/8
Fiber 2 Ch9/10
Fiber 2 Ch11/12
Fiber 2 Ch13/14
Fiber 2 Ch15/16
HDMI Ch1/2
HDMI Ch3/4
HDMI Ch5/6
HDMI Ch7/8
Dolby Ch1/Ch2
Dolby Ch3/Ch4
Dolby Ch5/Ch6
Dolby Ch7/Ch8
Dolby Aux
Mute
2 Embedded Audio Out
This parameter turns embedded audio in the Processor output video to On, Mute,
or Off.
On (default)
Mute
Off
Turn audio embedding On at the Processor output.
Embeds but mutes audio on the Processor output.
Turns audio embedding Off at the Processor output.
The FS2 does not support embedded audio output for the following formats:
• 2K1080p 29.97 or 2K1080p 30
• 2K1080p 59.94 or 2K1080p 60 when 3G Config is set to 3 Gb Level B or 1.5 Gb
DualLink.
Embedded audio is available for 3 Gb Level A format.
3 Audio Follow Video
This parameter determines whether audio settings are remembered for each
video input.
Off (default)
On
Normal operation. Audio settings must be made separately from
any video settings; they are not associated automatically.
The FS2 remembers the saved audio settings associated with the
currently selected video input.
When AFV is Off, you must manually select the audio you want for a selected
video input, and that audio source remains selected until you change it. If the
audio source has never been selected, the factory default audio source is used.
When AFV is On, the FS2 remembers the saved audio settings associated with
the currently selected video input. Whenever a new video input is selected,
the corresponding audio settings are recalled. This allows you to set up specific
audio settings for the different video inputs (i.e., perhaps the SDI 1 has a specific
embedded audio channel mapping while the component video input might
always use AES audio input).
Audio Follow Video applies to these parameters:
• 1 Audio Input
• 1.1—1.16 Audio Map
• 1.17—1.24 Audio Map (Stereo)
• 6.0 Audio Delay
• 7.0 Audio Output Levels