FS2 Frame Synchronizer/Converter v3.0 85 www.aja.com
Network Pane and Network Configuration Screen
Click the
Network
gear icon
The Network pane on the right side of any screen lists the FS2 systems that
appear on the network. This pane includes three additional controls:
• Hover the cursor over any system name to see its IP address.
• Right-click any system and select Identify to light the system ID LEDs.
• Click the gear-shaped icon in the Network pane (or select Network from the
Menu list on the left side of the screen) to open the Network Configuration
screen listing FS2 network settings.
The Network Configuration screen allows you to view and change your FS2’s
network settings and then click Apply to activate them.
See
for detailed setup instructions for connecting the
FS2 to a network. Consult your network administrator about how to configure
network settings.
IP Address Type
IP Address Type determines the type of TCP/IP network configuration used by the
FS2. DHCP enables the FS2 to connect to the network DHCP server, which assigns
the IP Address, Netmask, and Gateway automatically. Static lets you set these
parameters manually.
NOTE: If the IP Address Type is DHCP, the IP Address, Netmask, and Default Gateway
are gray, indicating they are set automatically and cannot be changed unless
IP Address Type is first set to Static. Changes are saved and activated upon
confirmation using the Apply button.
DHCP (default)
Static Addr
Select automatic IP address assignment from the LAN DHCP server.
If the FS2 cannot find a DHCP server, it fails over to the static IP
address.
Assign a static IP address manually (using parameters 2.2, 2.3, and 2.4).
The factory default static IP address: 192.168.0.2