FS2 Frame Synchronizer/Converter v3.0 48 www.aja.com
temporarily, and the fan can be set to a higher speed if the system detects very
high internal temperatures. Changes to this setting are automatically saved
Variable
Changes the fan speed in steps from 1 (slow) to 10 (fast).
Default is 10.
12 Serial Number (view only)
This parameter displays the FS2’s unique serial number.
13 Software Version (view only)
This parameter displays the FS2’s software version number.
14 Reboot
This parameter lets you reboot the FS2. Press and hold in both front panel knobs
simultaneously to reboot.
During reboot, the display shows [Rebooting], goes dark momentarily, and then
shows the percentage of progress as the system reboots. Rebooting takes a
couple of minutes.
PRESET Menu Group
The PRESET Menu Group provides the means of saving, editing the names of,
and loading FS2 presets. A preset is a set of all System, Video 1/2, Audio 1/2, and
Output parameters as they were set at the time the preset was stored.
Caution! When you recall a Preset Configuration, the recalled preset immediately
replaces the system’s existing configuration. All previous settings are lost unless
you have previously stored them in another preset configuration or an exported
file.
During recall, the display reads, Recalling until the recall is finished. On recall
completion, the displays shows the success or failure: Recalled, Failed, or Empty. A
failed or empty recall does not recall anything and leaves the FS2 as it was. (Preset
registers are empty until you store something in them.)
During a store, the display reads Storing until the store is finished. On store
completion, the display shows Complete or Failed. A failed store does not store
anything and leaves the preset register as it was. To retry a failed store, turn
SELECT to another preset number and then back to the desired preset number.
1 Factory Preset
This parameter recalls a read-only Factory Preset.
Factory
Recall
Recalls factory values. Push ADJUST momentarily to perform (take)
the recall. The display reports “Loading” and “Complete” during
the recall. User preferences, network settings, and existing Presets
are not affected by recalling the Factory Preset.