AJA FS2 Installation And Operation Manual Download Page 106

Page: 106 / 120

FS2 Frame Synchronizer/Converter v3.0 106 www.aja.com

Network Interface

•  10/100 Ethernet (RJ-45)
•  Embedded web server for remote control
•  VTECS™ protocol for Remote Control Panel

User Interface

• Alphanumeric display, with dedicated buttons/knobs

Machine Control

• GPI in/out, 15-pin D-connector

See

Figure 15 on page 107

for pinouts.

Size (w x d x h)

• 17.25" x 14.5" x 1.75" 1RU (438.1mm x 368.3mm x 44.4mm)

Weight

• 7.9 lb (3.6 kg)

Power

• 100-240 VAC 50/60 Hz, (Dual, redundant power supplies), 55W typical; 80W

max.

Environment

• Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)
• Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140

degrees F)

• Operating Relative Humidity: 10-90% noncondensing
• Operating Altitude: <3,000 meters (<10,000 feet)

Summary of Contents for FS2

























































































































Search results

Summary of Contents for FS2

Reviews:

AJA FS2, Installation And Operation Manual, Page: 106 / 120

Search results

Summary of Contents for FS2

Reviews: