FS2 Frame Synchronizer/Converter v3.0 21 www.aja.com
NOTE: For proper operation the input Reference signal must be stable and properly
terminated using a 75-ohm terminator on either the unused loop connector or
the last piece of downstream equipment to which the Ref Video is connected.
About Inputs and Outputs
To operate the FS2, first select an Output Video Format (In the Video 1 or 2 menu);
then select an Input port. The FS2 will automatically determine the selected input
video format and convert it (if necessary) to the selected Output Video Format.
Any Video or Audio Input can be selected by either Processor 1 or Processor 2,
and either processor’s output can be sent to any output port.
The composite Video Output has a dedicated Downconverter so it can always
display an output even if it is selected to output an AV Processor that is set to
output HD.