AJA FS2 Installation And Operation Manual Download Page 41

Page: 41 / 120

FS2 Frame Synchronizer/Converter v3.0 41 www.aja.com

S.4 Vid2 Format Status

This menu shows the current primary settings for Processor 2.

Display

Description

VID2

Input Source

Format

BKGD

Backgd Source

GEN

Genlock Source

Format

OUT

Format

Selected Processor 2 video input source and format.

Selected Background video source.

Selected Genlock source and format.

Selected Processor 2 output format.

S.5 Vid2 Format Alarm Status

This menu shows the Processor 2 alarm status. Absence of alarm shows as OK. If

selections are incompatible, the status of the affected signal shows incompat.

Display

Description

VID2

Input Source

Status

BKGD

Backgd Source

Status

GEN

Genlock Source

Status

OUT

Status

Selected Processor 2 video input source alarm status.

Selected Background video source alarm status.

Selected Genlock source alarm status.

Selected Processor 2 output format/alarm status.

S.6 Output Status

This menu shows the video source selected for each of the video outputs.

Display

Description

SDI1

Selected Video Processor

SDI2

Selected Video Processor

Fiber1

Selected Video Processor

Fiber2

Selected Video Processor

HDMI

Selected Video Processor

Cmpn

Selected Video Processor

Cmpn

Selected Video Processor

Selected Processor feeding the SDI 1 output.

Selected Processor feeding the SDI 2 output.

Selected Processor feeding the Fiber 1 output.

Selected Processor feeding the Fiber 2 output.

Selected Processor feeding the HDMI output.

Selected Processor feeding the Component output.

Selected Processor feeding the Composite output.

S.7 Power/Temp Alarm

This menu shows the power supply status of the FS2 and the temperature status.

If a power supply is unplugged, the display top line indicates PS OFF or PS Error.

Display

Description

PS1 Alarm

Status

PS2 Alarm

Status

TmpAlarm

Status

Displays the state of the PS1 power supply (OK or ERROR).

Displays the state of the PS 2 power supply (OK or ERROR).

Displays a temperature alarm if the FS2 overheats.

S.8 Caption Status

This menu shows what type of closed caption data is selected and whether

closed caption data is present on the selected video input.

Display

Description

VID1CC

Caption Type & Presence

ViD2CC

Caption Type & Presence

Processor 1 selected caption type (SD/HD/Invalid) and

presence (Detected/Not detected/Pass through).

Processor 2 selected caption type (SD/HD/Invalid) and

presence (detected/not detected/Pass through).

Summary of Contents for FS2

























































































































Search results

Summary of Contents for FS2

Reviews:

AJA FS2, Installation And Operation Manual, Page: 41 / 120

Search results

Summary of Contents for FS2

Reviews: