FS2 Frame Synchronizer/Converter v3.0 16 www.aja.com
AUDIO 1 and 2
Displays the Audio 1 Menu Group, which allows you to set Audio Processor 1
selections and adjustments:
• Audio Processor input selection, output embedding, and Audio Follow Video
(AFV)
• Audio Signal Generator Selection
• Audio1 channel and stereo mapping
• Audio1 level, phase, and delay adjustments
Control Knobs
These are the general rules of SELECT and ADJUST knob operation:
SELECT
Turning the SELECT knob performs these actions:
• Turn SELECT in either direction to scroll through the menus.
• Stop on a menu to enter that menu for editing.
• Turn SELECT within a menu to scroll through multiple parameters.
• Pause on a parameter to select it for editing. For multiple fields in a parameter,
use SELECT to move through the fields (after pressing Adjust to enter field
editing mode).
• Push SELECT momentarily to undo and restore the previous setting.
ADJUST
Turning the ADJUST knob performs these actions:
• Turn ADJUST to change the values of a selected parameter.
• In most cases, leaving a value in place for a moment sets that value.
• To perform special actions, such as recalling a register, push the knob to
confirm the displayed value. Display line 4 indicates such special actions.
• Some parameters having multiple fields, such as IP Address require you to
push the ADJUST knob to select a field, and push again to save changes.
• Hold down the knob to reset a value to the factory default; for multiple field
values, all fields are reset to the default.
Table 1. SELECT and ADJUST Knob Operation Summary
Function
Knob Action
Scroll through menus.
Scroll through parameters in a multiparameter menu.
Scroll through numerals or letters in a parameter.
Turn SELECT backwards or forward.
Enter edit mode for a menu.
Enter edit mode for a parameter.
Enter edit mode for values, numerals, or letters.
Advance to the next value, numeral, or character to edit.
Turn and stop SELECT on the item to
edit. (For some multiple parameter
menus, push ADJUST so that the selected
parameter blinks.)
Increment/decrement a value.
Turn ADJUST.
Coarse adjust a value.
10x speed - Hold down button (turns blue)
and turn ADJUST.
- or -
100x speed - Hold down button (turns
blue), momentarily release and press
button again (turns light blue) and turn
ADJUST.
Reset a value to the factory default value.
Set a number to the default value (typically zero).
Set a letter to a default value (typically space).
Hold down ADJUST.