FS2 Frame Synchronizer/Converter v3.0 19 www.aja.com
Table 3. Video Incompatibility Examples
Video Incompatibility Detected Alarm Status screen will show
Genlock Source is set to
“Reference”, but no Reference
signal is detected.
VID1
SDI 1
525i59.94
BKGD Matte
GEN
Reference
No Input
OUT
1080i59.94
Genlock Source signal format is
not compatible with selected
Input Format.
VID1
SDI 1
Incompat
BKGD Matte
GEN Reference
Incompat
OUT
1080i59.94
Genlock Source signal format is
not compatible with selected
Output Format.
VID1
SDI 1
525i59.94
BKGD Matte
GEN Reference
Incompat
OUT
Incompat
Input signal is not compatible
with selected Output Format.
VID1
SDI 1
Incompat
BKGD Matte
GEN Reference
1080i59.94
OUT
Incompat
Rear Panel Description
Serial Digital
In/Out BNC
(3G/SD/HD)
Composite
In/Out BNC
10/100/1000
RJ45 Ethernet
LAN Connector
GPI 15-pin
DB-15F Connector
ID
LED
(Future Use)
External Reference
I/O with looping
BNC connectors.
Use 75-ohm terminator
on unused connector
or downstream equipment.
AC Power #2
Autosensing
100 to 240VAC
50/60Hz
AC Power #1
Autosensing
100 to 240VAC
50/60Hz
Component
YPbPr and
RGB or
Composite (v1.1)
In/Out
BNC
Analog Audio In/Out
Channels 1 through 8
DB-25F Connectors
(uses Tascam-style
cable)
AES/EBU Digital
Audio In/Out
Channels 1 through 16
DB-25F Connectors
Serial Digital
Fiber In/Out
(3G/SD/HD)
HDMI
In/Out
Connectors
P/S 1 and P/S 2
Two 3-pin grounded connectors provide AC power to the two independent
power supplies. The supplies are autosensing for 100–240 VAC, 50/60 Hz. Only
one connection is required for operation, but both connectors must be plugged
into AC power for redundant power protection.
AES/EBU Digital Audio
16-Channel, 24-bit AES Input and Output on separate DB-25 connectors (Tascam
"Audio Connection Pinouts" on page 108
.
Analog Audio Ch.1-8 In/Out
8 channel Balanced Analog Audio Input and Output on separate DB-25
connectors (Tascam pinout, see
"Audio Connection Pinouts" on page 108
. Audio
A/D and D/A converters are 24 bit.