FS2 Frame Synchronizer/Converter v3.0 58 www.aja.com
described in the SMPTE 425 standard. (If the SDI1 selection is Dual Link, these
SDI2 settings are ignored because the SDI 2 output is used for dual link.)
3 Gb-Level A (default)
3 Gb-Level B
Formats 3G SDI Output as Level A.
Formats 3G SDI Output as Level B.
10.1 Fiber1 3G Config
The Fiber1 3G Config parameter determines how 1080p50/60 signals are
formatted for the Fiber 1 output. The first two choices select either “Level A” or
“Level B” as described in the SMPTE 425 standard. The third selection ties Fiber 1
Out and Fiber 2 Out together into a single 1.5 Gb Dual-link 1080p50/60output. In
this case, the Fiber2 Video Out and Fiber2 Audio Out selections are ignored.
3 Gb-A (default)
3 Gb-B
1.5 Gb Dual Link
Sends 3 Gb format A 1080p 50/60 to the Fiber1 output.
Sends 3 Gb format B 1080p 50/60 to the Fiber1 output.
Sends dual-link 1.5 Gb 1080p 50/60 to the Fiber1 and Fiber2
outputs. The signals and outputs are tied together.
10.2 Fiber2 3G Config
The Fiber2 3G Config parameter determines how 1080p50/60 signals are
formatted for the Fiber 2 output. The two choices select either “Level A” or “Level
B” as described in the SMPTE 425 standard. (If the Fiber1 selection is Dual Link,
these Fiber2 settings are ignored because the Fiber 2 output is used for dual link.)
3 Gb-Level A (default)
3 Gb-Level B
Formats 3G SDI Output as Level A.
Formats 3G SDI Output as Level B.
VIDEO 1 and VIDEO 2 Menu Groups
The following descriptions explain the Video 1 and 2 Menu Groups. Because the
selections for the video processors are identical, both are described here.
Video Input and Output
This parameter performs input video source selection for the selected Video
Processor (1 or 2). Multiple input sources are available at the connectors on the
FS2 rear panel, but the active input source routed to the selected Video Processor
is the one you select here.
1 Video Input
SDI1
(default)
SDI2
SDI DualLink
Fiber1
Fiber2
Fiber DualLink
HDMI
Composite
Component
Select SDI1 as the input source.
Select SDI2 as the input source.
Select SDI DualLink, linking both SDI inputs as the input source.
Select Fiber1 as the input source.
Select Fiber2 as the input source.
Select Fiber DualLink, linking both Fiber inputs as the input sources.
Select the HDMI input as the input source.
Select Composite as the input source.
Select Component as the input source.
Source Memory
Changing the Video Input selection automatically selects new values for Proc
Amp parameters (11.1 through 11.4) and Color Corrector (RGB) parameters