FS2 Frame Synchronizer/Converter v3.0 27 www.aja.com
Figure 5. FS2 Network Example, Two FS2s on a LAN, with Laptop for Remote
Control
10/100/1000 Base-T
Laptop
w/Web Browser
for FS2 Remote
Control
Firewall
& Router
WAN/ISP
Hub or Switch
10/100/1000 Base-T
LAN
FS2 Default Network Settings
The FS2 ships from the factory set for DHCP networking, and can be manually
reset to the following default network settings:
IP Address
192.168.0.2
Subnet Mask
255.255.255.0
Gateway
192.168.0.1
Networking Using DHCP or Default Static IP
The FS2 factory default configuration automatically looks for a DHCP server to
issue an IP address. If your network includes a DHCP server, plug the FS2 into the
network and connect with the FS2 as follows:
1. Press the CONFIG button.
2. Turn the SELECT knob to navigate to config parameter 2.2. Note on a piece
of paper the DHCP-supplied IP address shown.