Airwell YCV280, Installation And Maintenance Instructions Manual

Page: 335 / 412

K. 26 degree lock function (SW08-3): in heating mode, though set temp. exceeds 20 degree, count as 20 degree;
in cooling mode, though set temp. is below 26 degree, count as 26 degree.
function
normal mode
26 degree lock is available
SW08-3
0
1
L. Indoor priority selection (SW08-4)---pre-set, not available
M. Passive contact selection (SW08-5): room card function
function SW08-5
0
1
passive contact function(room card) is available
passive contact function(room card) is unavailable
N. Wired control/remote control selection: SW08-6
SW08-6
1
0
wired control type
remote control type
function
O. Indoor installation height selection(SW08-7)
SW08-7
1
0
normal mode
function
when height is over 2.7m, indoor motor speed will be increased
one class: in low speed, unit will run at med speed; in med speed,
unit will run at high speed; in high speed, unit will run at high
speed( not increased)
P. For twin energy source or not be used (SW08-8)
SW08-8
1
0
TES is not available
TES is available
function
Q. EEV open angle setting manually (CN27, CN29)
When being electrified, short connect CN27, EEV will open fully for 2 minutes; short connect CN29,
EEV will close fully for 2 minutes.
341