Airwell YCV280, Installation And Maintenance Instructions Manual

Page: 75 / 412

Suspension units as follows:
Hanging of the indoor unit
Fasten the nut on the suspension screw and then hang the suspension screw in the T slot of the
suspension part of the unit. Aided with a level meter,adjust level of the unit within 5mm.
(6) Installing the suspension screw:
Use M8 or M10 suspension screws (4,prepared in the field)(when the suspension screwheight exceeds
0.9m, M10 size is the only choice).These screws shall be installed as follows with space adapting to air
conditioner overall dimensions according to the original building structures.
Original concrete slab
Steel reinforcement structure
New concrete slab Wooden structure
A square wood shall be supported
by the beams and then set the
suspension screws.
To set with embedded parts,
foundation bolts etc.
Square wood
Beam
Suspension screw Guide plate embedded part
Knife embedded part
Foundation bolt
(Pipe suspension foundation bolt)
Iron reinforcement
Use hole hinge,hole plunger
or hole bolt.
Use steel angle or new support
steel angle directly.
Hanging bolt
Suspension screw
Support steel angle
Fig. 5
M8 wide expansion bolt
M8 suspender screw
M8 wide lock washer
M8 screw nut
Air conditioner
75