AHT MACAO 100, Operating Instructions Manual

Page: 31 / 506

en | AHT Cooling Systems GmbH Safety | 2
405859_1_0819 31 / 505
2.5.3 Mechanical hazards
WARNING
Transport of the appliances with indus-
trial trucks.
Risk of injury to persons in the event of a colli-
sion.
▪
Observe transport routes for industrial
trucks.
▪
Secure transported goods.
▪
Only trained personnel may operate
industrial trucks.
▪
Observe the stacking height specifications
on the packaging.
Appliance tipping hazard.
Persons may become trapped.
▪
Do not climb onto or into the appli-
ance.
Missing and/or not fully functional
safety devices.
Risk of injury, e.g. from rotating parts.
▪
Check to ensure safety devices are
complete and working.
▪
Do not remove protective devices
and covers attached to the appli-
ance.
CAUTION
Material breakage.
Falling hazard. Cuts.
▪
Do not climb onto or into the appli-
ance.
▪
Do not apply any load to the lid.
Falling objects.
Impact injuries. Cuts in the event of glass
breakage.
▪
Do not set down any objects on the
appliance.
Leakage of condensation water.
Slipping hazard.
▪
Check for puddles in front of and un-
der the appliance.
▪
Promptly remove leaking condensa-
tion water.
▪
Contact the maintenance service
promptly (see
→ Maintenance ser-
vices).
Opening / closing the lid.
Hands (body parts) may be trapped.
▪
When opening / closing, do not reach
into the opening gap.
▪
Look out for other persons when open-
ing/closing the lid.
Safety when handling glass
CAUTION
Glass breakage.
Body cuts. Impact injuries.
▪
Do not install appliances with lami-
nated insulating glass at altitudes
above 2000 m (6562 ft). Laminated
insulating glass may break due to air
pressure difference.
▪
Check glass elements for damage,
e.g. cracks, breaks. In the event of
damage, promptly contact the
maintenance service (see
→ Mainte-
nance services).
▪
Do not apply any load to the glass lid.
▪
Do not climb onto or into the appliance.
▪
It is forbidden to store glass contain-
ers in freezers.
Dispose of broken glass.
Hand cuts.
▪
Use protective gloves to remove split
glass parts and goods that may have
been damaged as a result.
▪
Carefully and completely remove all
split glass parts and damaged goods.
2.5.4 Residual risks
The manufacturer accepts no liability for damage
caused by non-compliance with this manual and other
manufacturer specifications.