Agilent Technologies WireScope 350, User Manual, Page: 38 / 155

Chapter 4 Preparing to Run an Autotest 37
Setting the maximum frequency
The selected cabling performance limit determines the minimum required test
frequency range. This setting allows you to specify a larger frequency range
than is required for the current cabling performance limit. Select the test
frequency icon and press
or the Edit button to change the maximum test
frequency.
Plot storage setting
The WireScope 350 can store either a summary data set or a full data set,
including plots, for each test performed. The advantage of storing plots is the
ability to re-evaluate saved test results for standards compliance and
troubleshooting purposes.
To set the WireScope 350 to save plots for each autotest, select the save plots
icon and press
or Edit .