Chapter 2
33
Basic Operation
Using the Graphical User Interface
Basic Op
er
atio
n
Figure 2-4
N6031A and N6033A
Creating and Playing a Sequence
Follow steps
1-5
of
“Generating a Single Tone Signal” on page 28
to
configure the signal path and clock reference.
1. Select the
Sequencer
tab.
2. From the
Segment List
select
Add
. This brings up a
Segment
Information
window.
3. Browse and select the
100 MHz
waveform, then click
OK
.
NOTE
For dual channel sequencing, add the same waveform to both channel 1 and
channel 2. Currently, the software does not support independent channel
sequencing.
4. Repeat steps
2
and
3
twice, selecting the
2tone
and
5_tone
waveforms.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com