38
Chapter 2
Basic Operation
Using the Graphical User Interface
B
a
si
c Op
er
at
io
n
2. Highlight the
Master
unit in the
N6030 Selection
window list and click
OK
.
Figure 2-8
N6030 Selection Window
3. Select the desired signal conditioning path.
4. Select the desired waveform file.
5. Select the
Clock
tab.
6. From the
SYNC CLK IN
drop-down list, select
Master
.
Notice the following changes to the graphical user interface that are
automatically configured when the Master unit is assigned:
Clock Tab
the internal clock is no longer driving the sample clock
the sample clock and sync clock out are driven by the external clock in
signal
the sync clock in signal communicates with the sequencer
Marker Tab
Marker 4 is assigned to a Software marker and is grayed out
Trigger Tab
Start trigger is assigned to Trigger 4 and is grayed out
Selecting the Slave Unit
1. Open an N6030A Control Utility session (double-click the Agilent
N6030A icon on the desktop).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com