Chapter 2
29
Basic Operation
Using the Graphical User Interface
Basic Op
er
atio
n
The connection will automatically enable differential mode. Click on the
negative (-) node to open this path and enable single-ended mode..Notice
that the default gain value was 0.500 volts. Once you select single-ended
mode, the value drops to 0.250 volts. These are maximum values for the
modes indicated.
5. Select the
Clock
tab and configure the
10MHz REF IN
. For this
example, we utilized the 10 MHz reference from the E4440 Spectrum
Analyzer in step 1. If you are using a PXI chassis, leave the clock set to
the default Backplane 10MHz
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com