Chapter 6
105
Troubleshooting
NI MXI-4 Link
T
rou
bl
es
ho
oti
n
g
NI MXI-4 Link
If You Encounter Problems Configuring the NI MXI-4 Link
1. Uninstall the N6030A Driver. (from Administrator mode)
Right-click
My Computer
>
Properties
>
Hardware
>
Device
Manager…
Expand
Agilent Technologies Test & Measurement Devices
Right-click on
Agilent Technologies N6030A
and select
Uninstall
2. Uninstall the software
Go to:
Start
>
Settings
>
Control Panel
Double-click
Add or Remove Programs
Select
Agilent N603x Software Package
, select
Remove
.
Select
Windows Driver Package-Agilent Technologies Agilent
N6030A Device Driver
, select
Remove
.
Select
IVI Shared Components
, select
Remove
.
Select
National Instruments Software
, select
Remove.
3. Shut down the PC, power off the chassis, remove the cable from the
MXI-4 card, and remove the MXI-4 card from the PC.
4. Re-boot the PC and make sure all the software listed above was removed.
Download the IVI Compliance Package, which contains the IVI Engine
and the IVI Shared Components.
5. Go to:
http://www.ni.com/
Search on
ivi compliance package version 2.2
.
Select
IVI Compliance Package Version 2.2 for Windows
2000//NT/XP-HWDRIVER-Support-National
Follow the instructions for the
Download Process
at the bottom of
the page.
6. Install the NI software without the MXI-4 card in the PC.
7. Install the N6030A software from the N6030A CD.
8. Shut down the PC, install the MXI-4 card and attach the cable.
9. Power on the chassis.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com