Chapter 5
91
Direct Digital Synthesis Option 330
Direct Digital Synthesis
Direct
Digit
al Syn
the
sis Op
tio
n
330
Direct Digital Synthesis Using the Control Utility
NOTE
A spectrum analyzer is required to display the waveform.
Configuring the Equipment
1. Connect a 10 MHz reference from the spectrum analyzer to the AWG
front panel connector. If you are using a PXI chassis, use the backplane
10MHz reference.
2. Connect the channel 1 positive (+) output to the spectrum analyzer RF
input connector.
Selecting the DDS Option
1. Open the
Control Utility
by double-clicking the icon on the desktop.
2. In the
DDS Session Dialog
box, select
Yes
.
Configuring the Signal Conditioning Path
1. Select the
Output
tab and connect a single-ended signal conditioning
path to CH1 OUT (+) (click on the node that you want to connect).
The connection will automatically enable differential mode. Click on the
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com