Chapter 1
21
Introducing the N6030A Series AWGs
Verifying System Operation
Intro
d
u
cing
th
e N60
30A Series
AW
G
s
Verifying System Operation
System Set Up
Embedded Controller
1. Start with the controller (PC) turned off.
2. Connect the keyboard, mouse, and monitor to the controller front panel
interface.
3. Connect the power cord to the chassis and turn the power on.
MXI-4 Link
1. Start with the controller (PC) turned off.
2. Connect the cable from the PCI card in the PC to the connector on the
MXI-4 card installed in the chassis.
3. Connect the power cord to the chassis and turn the power on.
4. Turn the PC on.
Waveform Playback
NOTE
An Agilent E4440A Spectrum Analyzer or equivalent is required to view the
waveforms.
1. Connect a 10 MHz reference to the AWG front panel connector. If you
are using a PXI chassis, use the backplane 10 MHz reference.
2. Connect the channel 1 positive (+) output to the spectrum analyzer RF
input connector.
3. Open the user interface by double-clicking the
N6030A Control Utility
icon placed on the desktop during installation.
NOTE
If you do not have an icon, go the
Start
>
Programs
>
Agilent
>
N6030A
and select
Control Utility
to open the user interface.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com