12
Chapter 1
Introducing the N6030A Series AWGs
The N6030A Series Module
Intro
d
u
cing
th
e N60
30A Series
AW
G
s
The N6030A Series Module
Front Panel Interface
MARKER
There are four SMB female marker output connectors that can be used for
triggering or system synchronization. The connectors are 3.3V TTL/CMOS
30 ohm series terminated. The output is capable of driving a 50 ohm load.
TRIGGER
There are four SMB female trigger input connectors that are used to control
the waveforms in the sequencer and create event-based signal simulation.
The connectors support TTL/CMOS, ECL, and PECL logic levels
Injector/Ejector Handle
This handle is used during installation and removal of the AWG module.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com