Chapter 7
115
Characteristics
Technical Characteristics
C
h
ar
ac
ter
is
ti
cs
Sample clock
Internal: Fixed 1.25 GS/s
Internal clock output: +3 dBm nominal into 50 ohm load
External clock input: Tuneable 100 MS/s to 1.25 GS/s
External clock input (power):
−
15 to +5 dBm, 0 dBm nominal
Phase noise characteristics:
Accuracy:
Same as 10 MHz timebase input
Frequency reference
Input drive level: +2 to +12 dBm into 50 ohms (+2 dBm nominal)
Waveform length
8 MS per channel (16 MS with option 016)
Minimum waveform length: 128 samples
Waveform granularity: 8 samples
Segments
From 1 to 32,768 unique segments can be defined consisting of waveform
start and stop address, repetitions and marker enable flags.
Sequences
Up to 16,384 total unique waveform segments can be combined with
separate loop counts to form a sequence.
1 kHz
-95 dBc/Hz
10 kHz
-115 dBc/Hz
100 kHz
-138 dBc/Hz
1 MHz
-150 dBc/Hz
Noise Floor
-150 dBc/Hz
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com