92
Chapter 5
Direct Digital Synthesis Option 330
Direct Digital Synthesis
Direc
t Digit
al
Syn
the
sis Op
tio
n
330
negative (-) node to open this path and enable single-ended mode.
Configuring the Clock
1. Select the
Clock
tab and configure the 10MHz REF IN. For this
example, we utilized the 10 MHz reference from the E4440 Spectrum
Analyzer in step 1. If you are using a PXI chassis, leave the clock set to
the default Backplane 10MHz.
2. Use the default setting for the
Interpolation Ratio
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com