Chapter 2
39
Basic Operation
Using the Graphical User Interface
Basic Op
er
atio
n
2. Highlight the
Slave
unit in the
N6030 Selection
window list and click
OK
.
3. Select the desired signal conditioning path.
4. Select the desired waveform file.
5. Select the
Clock
tab.
6. From the
SYNC CLK IN
drop-down list, select
Slave
.
Notice the following changes to the graphical user interface that are
automatically configured when the Slave unit is assigned:
Clock Tab
the internal clock is disabled
the sample clock is driven by the external clock in signal
the sync clock out is disabled
the sync clock in signal communicates with the sequencer
Trigger Tab
Start trigger is assigned to Trigger 4 and is grayed out
Initiating Synchronous Playback
1. In the
Quick Play
area of the
Slave
GUI, select
Play
. This arms the
waveform playback.
2. In the Q
uick Play
area of the
Master
GUI, select
Play
. This initiates
synchronous waveform playback.
NOTE
You can view the output on an oscilloscope by setting Marker 1 on the
Master module to Waveform Start and cabling the marker output to trigger
the oscilloscope.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com