[F/T] + [Data Entry Keys *] + [Unit Key]
Set Frequency
or Period
Set Offset
Set Amplitude
Function
Operations
1. Constant Waveform (CW) Mode
[AMP] + [Data Entry Keys *] + [Unit Key]
[OFS] + [Data Entry Keys *] + [Unit Key]
Select Waveform Press [WF] key
* Note: Use [ESC] to correct or cancel input
2. Servo Position Mode
3. Servo Run Mode
4. Mode Selection
[F/T] + [Data Entry Keys *] + [Unit Key]
Set Pulse Width
Change Settings
Set Amplitude
Function
Operations
[AMP] + [Data Entry Keys *] + [Unit Key]
Push [ADJ] (refer to detailed manual)
Use [WF] key to start and hold servo running.
[MODE] + {Turn [ADJ] to select} + [WF]
Operating
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Frequency range: 0 - 200KHz (Sine)
Frequency resolution: 1Hz
Frequency accuracy: 100 ppm
Period resolutions: 1ms
Amplitude range: 0 10V peak-to-peak
D.C. offset range: -5V +5V
Waveform memory length: 256 bytes
Sample rate: 2.5Msps
Output impedance: 50 ohm
Power supply voltage: 15V DC +/- 10%
Current consumption: < 150mA (without loading)
Specification
* Note: Use [ESC] to correct or cancel input
Please visit
for detailed manual and related documents
www.jyetech.com
Quick Use Guide
Applicable Model: 08503, 08503K, and 08504K
FG085 Function Generator
Select
Mode
Power ON/OFF
Select
parameter
Data entry
Select unit
Select waveform
Incremental
adjustment
(push for setting
change)
Cursor
Frequency
or period
Amplitude
DC offset
Waveform
Output
connector
Correction
or exit
Panel & Connectors
Output
connector
Power connector
(
)
central pole positive
USB connector
Headers & Adjustment
U5
program
U6
program
LCD contrast
adjustment
Alternative
USBconnector
Incremental
Adjustment
Select parameter and turn [ADJ] dial
Incremental
Adjustment
Select parameter and turn [ADJ] dial
All manuals and user guides at all-guides.com
all-guides.com
