Agilent Technologies HP 83711A, User Manual

Page: 222 / 251

Error Messages
Messages
Correct the HP-IB command CORRection:FLA Tness[:D A T A] so that all
of its frequency parameters are from 1 GHz to 20 GHz and all of its loss
parameters are from 040 dB to +40 dB . If other modules or options
are installed that extend the frequency range of the synthesizer , this
frequency range will be extended also .
2277 2277,"CORR:FLA T cannot query empty table;(2277)"
The selected level correction table data cannot be queried because it is
invalid or it does not exist. Check that MEMory:T ABLe:SELect is set to
a level correction table that has data.
2291 0224,"Illegal parameter value;SERIAL NUM(2291)"
Correct the HP-IB command SY ST em:SNUMber so that its string
parameter is 10 characters or less .
2292 0151,"Invalid string data;SERIAL NUM bad char(2292)"
A serial number can only contain characters from ASCII 32 (space)
through ASCII 126 (~). However , ASCII 44 (,) and ASCII 59 (;) cannot
be used.
2294 0222,"Data out of range;POW METER ADDRESS(2294)"
Select a power meter address for automatic level correction from 0 to
30. Secondary addresses may be allowed in future rmware revisions .
2300 0222,"Data out of range;CAL:FLA T:FREQ:ST ART(2300)"
Correct the HP-IB command CAL:FLA Tness:FREQuency:ST ARt so that
its parameter is from 10 MHz to 40 GHz. See the service manual for
more details on this feature .
2303 0222,"Data out of range;CAL:FLA T:A TT(2303)"
Correct the HP-IB command CAL:FLA Tness:A TT enuation so that its
parameter is from 0 dB to 120 dB with a resolution of 10 dB . See the
service manual for more details on this feature .
2444 0222,"Data out of range;LEVEL CORR ST ART FREQ(2444)"
Select an automatic level correction start frequency from 1GHz to
20GHz. If other modules or options are installed that extend the
CW frequency range of the synthesizer , this frequency range will be
extended also .
2447 0222,"Data out of range;LEVEL CORR STOP FREQ(2447)"
8-34