Agilent Technologies HP 83711A, User Manual

Page: 145 / 251

Ke ys/Shifted Functions
L VL CR
Notes
1. If the level correction routine is aborted (b y pressing the 4 LOCAL 5 ke y), the existing level
correction data will be unaected.
2. After the level correction routine has successfully completed, save the level correction data to the
level correction table chosen b y the \SA VE CR" function. If the routine fails, the entered start and
stop frequencies, and number of points will remain at what the y were set at. Be aware , however ,
that the data in the level correct table will still reect the last successful level correction that was
run.
Once the synthesizer has completed the level correct routine and the new
level correction table has been generated, it is resident in the synthesizer
volatile memory . Pressing 4 PRESET 5 will erase the table . The table should be
stored in one of four level correction table registers .
The start frequency lower limit is equal to the synthesizer lower frequency
limit. The start frequency upper limit is equal to the stop frequency minus
the minimum frequency resolution at that frequency . F or example , the preset
value for start frequency increment value is 100 MHz .
The stop frequency lower limit is equal to the start frequency plus the
minimum frequency resolution at that frequency . The stop frequency upper
limit is 20 GHz. The preset value for stop frequency increment value is
100 MHz .
The allowable range for number of points is 2 to 401. The preset increment
value is 1.
6-33