Agilent Technologies HP 83711A, User Manual

Page: 223 / 251

Error Messages
Messages
Select an automatic level correction start frequency from 1GHz to
20GHz. If other modules or options are installed that extend the
CW frequency range of the synthesizer , this frequency range will be
extended also .
2457 2457,"RF on before running level correct;(2457)"
The RF must be turned on before running an automatic level
correction. Turn RF on and try running the automatic level correction
again.
2462 0222,"Data out of range;LEVEL CORR ST ART INC(2462)"
Select an automatic level correction start frequency increment from 1
kHz to 19.99 GHz. If other modules or options are installed that extend
the CW frequency range of the synthesizer , this frequency range will
be extended also . If Option 1E8 is installed the limits will also change
to allow for 1 Hertz resolution.
2465 0222,"Data out of range;LEVEL CORR STOP INC(2465)"
Select an automatic level correction stop frequency increment from 1
kHz to 19.99 GHz. If other modules or options are installed that extend
the CW frequency range of the synthesizer , this frequency range will
be extended also . If the Option 1E8 is installed the limits will also
change to allow for 1 Hertz resolution.
2471 0222,"Data out of range;HPIB ADDRESS INCR(2471)"
Select an HP-IB address increment from 1 to 29.
2474 0222,"Data out of range;YIG OSC CAL FREQ INC(2474)"
Correct the HP-IB command CAL:YIG:FREQuency:ST ARt:STEP so that
its parameter is from 1 GHz to 10 GHz.
2522 0222,"Data out of range;POW METER ADDRESS INC(2522)"
Select a power meter address increment from 1 to 29.
2525 0222,"Data out of range;NODE MEASURE INC(2525)"
Select a meter node increment within range .
2531 0222,"Data out of range;LEVEL CORR POINTS(2531)"
Select automatic level correction number of points from 2 to 401.
2534 0222,"Data out of range;LEVEL CORR POINTS INC(2534)"
8-35