Agilent Technologies HP 83711A, User Manual

Page: 205 / 251

Error Messages
Messages
F actory frequency level correction data for 1-20 GHz band, non-thru
paths are not valid. If you need to use this frequency range and you
are using a step attenuator , see the explanation for error number 4000.
737 737,"F actory level corr 0.01-1 GHz, 1-9 table;(737)"
F actory frequency level correction data for 0.01-1 GHz band, non-thru
paths are not valid. If you need to use this frequency range and you
are using a step attenuator , see the explanation for error number 4000.
738 738,"F actory level corr 0.01-1 GHz, 0 dB table;(738)"
F actory frequency level correction data for 0.01-1 GHz band, thru
path is not valid. If you need to use this frequency range and you
work with output levels that don't use the step attenuator , see the
explanation for error number 4000.
739 739,"Invalid data in table , not recalled;(739)"
This error indicates that a level correction table recall failed. Try
selecting the same level correction table again. If this error message
persists you will have to recreated the saved table .
740 740,"Another controller is on the HP-IB bus;(740)"
An automatic level correction was attempted but failed because there
is a controller on the HP-IB bus . Remove all controllers from the HP-IB
bus and try again.
741 741,"No HP-IB devices found;(741)"
An automatic level correction was attempted but failed to nd any
other devices on the HP-IB bus . Connect the desired power meter
to the HP-IB bus and try again. Check the HP-IB cable(s) for loose
connections .
742 742,"Errors in cleanup of HP-IB;(742)"
When exiting the automatic level correction, the synthesizer failed
to nish resetting the HP-IB bus and presetting the power meter .
Make sure the power meter address matches the power meter
address setting on the synthesizer . Check the HP-IB cable(s) for loose
connections .
743 743,"No HP-IB devices found;(743)"
An automatic level correction was attempted but failed to nd any
other devices on the HP-IB bus . Connect the desired power meter to
8-17