Agilent Technologies HP 83711A, User Manual

Page: 157 / 251

RCL CR
Invoking the RCL CR (recall level correction table) function (pressing the
4
SHIFT
5 key and then the 4
EXT METER
5 key) allows you to recall a previously
stored table of level correction data from one of four level correction register
locations .
The allowable range for register locations is 1 through 4. When 4 SHIFT 5 ,
4 EXT METER 5 is pressed, the text RECALL FRM TABLE XXX will be shown on
the synthesizer display where XXX is the last level correction register number
entered. Once you press a valid numeric key (1 through 4) and terminate
the entry by pressing 4 Hz 5 (ENTER), the table of level correction data will
be recalled from the location indicated by the numeric key pressed. If level
correction data has not been previously stored to a level correction register ,
an error message is generated and no change to the current data takes place
if you attempt to recall a level correction table from that register .
N O T E
The four level correction registers are separate from the instrument state registers. L evel correction
data is not cleared from memory when the synthesizer is set to the preset state and is unaected if
an instrument state is recalled from one of the instrument state registers.
6-45