Agilent Technologies HP 83711A, User Manual

Page: 50 / 251

T o Generate Millimeter Signals
By using external equipment with the synthesizer , you can generate
millimeter-wave signals .
Generating millimeter-wave signals uses the following external equipment.
Equipment Requirements
Microwave Amplier Must be compatible with the HP 8355X Source Module
used.
HP 8355X Source Module Must be capable of generating the desired frequency .
In addition, you must supply any cables and adapters necessary to connect
the equipment.
1. Connect the equipment as shown in Figure 3-1:
C A U T I O N
Turn o the A C power to the microwave amplier prior to connecting or
disconnecting the source module interface cable .
Figure 3-1. Millimeter-Wave Equipment Setup
2. Enter the proper multiplier value for the HP 8355X-series source
module that you are using into the synthesizer .
P erform the following procedure to select and enter the proper multiplier
value .
a. Press the 4 SHIFT 5 key .
b. Press the 4 FREQ 5 key .
3-4