Agilent Technologies HP 83711A, User Manual

Page: 161 / 251

SA VE
Invoking the S A VE function (pressing the 4
SHIFT
5 key and then the 4
RECALL
5
key) allows you to save the instrument state in one of ten register locations .
The allowable range for register locations is 0 through 9. When 4
SHIFT
5 ,
4
RECALL
5 is pressed, the text SAVE STATE IN REG XXX will be shown on
the instrument display where XXX is the last register number entered. Once
you press a valid numeric key (0 through 9) and terminate the entry , the
instrument state will be saved to the location indicated by the numeric key
pressed. Saving the instrument state to a given register location will write
over any instrument state previously stored at that location.
All user settings that are aected when the 4 PRESET 5 key is pressed will be
saved. Level correction tables , however , will not be saved. F or information
on saving level correction tables , refer to \S A VE CR" in this chapter .
Equivalent SCPI Command
*SAV register saves the instrument state to the register dened by
the \register" parameter .
See Also
4
RECALL
5
*S A V
S A VE CR
6-49