Agilent Technologies HP 83711A, User Manual

Page: 65 / 251

Generating Signals with the Synthesizer
T o Use the Level Correct Routine
T o store the table of level correct values in a level correction register location,
perform the following procedure .
1. Press the 4
SHIFT
5 key and then the 4
INT LEVEL
5 (SA VE CR) key .
The display will show SAVE IN TABLE XXX where XXX is the current level
correction register number .
2. Enter the desired level correction register number .
F or example , use the following procedure to choose level correction
register number 2.
a. Type 4 2 5 on the synthesizer numeric keypad.
b. T erminate the level correction register number entry by pressing the
4 Hz 5 (ENTER) key .
N O T E
Once the level correction register number entry has been terminated, the current table of level correct
values will write over an y old level correct data stored at that register location.
Related T asks
T o Use Previously Stored Level Correct Data
3-19