Agilent Technologies HP 83711A, User Manual

Page: 200 / 251

Error Messages
Messages
This error indicates that an HP-IB command or query has too many
parameters . Correct the HP-IB controller program so that the HP-IB
command or query contains the correct number of parameters .
0105 0105,"GET not allowed;(0105)"
Correct the HP-IB controller program so that the group execute trigger
does not occur within a line of HP-IB program code .
0104 0104,"Data type error;(0104)"
The parser recognized a data element dierent than one allowed. F or
example , numeric or string data was expected but block data was
encountered.
0103 0103,"Invalid separator;(0103)"
A separator was expected but an illegal character was encountered.
F or example , the space is missing from the following: FREQ.01GHz.
0102 0102,"Syntax error;(0102)"
An unrecognized command or data type was encountered.
0101 0101,"Invalid character;(0101)"
A syntactic element contains a character which is invalid for that type .
F or example , a header containing an ampersand would give this error .
0100 0100,"Command error;(0100)"
Some problem occurred while parsing an HP-IB command or query .
Insure that your programming is correct and try the command again.
0 0,"No error"
The error queue contains no errors .
110 110,"EEPROM unprotected;(110)"
The PG switch is set to 0 which leaves the EEPROM unprotected.
Open up the synthesizer and switch the PG switch to 1. This error
message is only a warning.
511 511,"YTO cal data init error;(511)"
The YIG oscillator factory calibration data checksum was incorrect. A
new YIG calibration should be performed or else the instrument may
be unable to attain lock at some frequencies .
8-12