Agilent Technologies HP 83711A, User Manual

Page: 221 / 251

Error Messages
Messages
2189 0224,"Illegal parameter value;DISPLA Y ST A TE(2189)"
The display state could not be set to the state requested.
2192 0224,"Illegal parameter value; LEV CORR ST A TE (2192)"
This command requires a boolean argument.
2198 0224,"Illegal parameter value;EXT REF(2198)"
The reference oscillator could not be set to INT ernal because an
internal oscillator does not exist or the reference oscillator could not be
set to EXT ernal because an external oscillator does not exist.
2210 0222,"Data out of range; ASSembly REVision (2210)"
The value must remain between 0 and +254.
2216 0222,"Data out of range;NODE MEASURE(2216)"
Select a meter node number within range . See the service manual for
more details on this feature .
2219 0222,"Data out of range;OPTION WRITE(2219)"
Select an option bit-eld number within range . See the service manual
for more details on this feature .
2237 0222,"Data out of range;OFFSET FREQ INCR(2237)"
Select an oset frequency increment from 1 kHz to 35 MHz. If the
Option 1E8 is installed the lower limit will change to 1Hz to allow for 1
Hertz resolution.
2240 0222,"Data out of range;LO FREQ INCR(2240)"
Select an LO frequency increment from 1 kHz to 359.5 MHz.
2243 0222,"Data out of range;DIRECT HW CONTROL INC(2243)"
Select synthesizer direct hardware control increment values within
range . See the service manual for more details on this feature .
2249 0222,"Data out of range;DIA G:ABUS?(2249)"
Correct the HP-IB query DIA G:ABUS? so that its parameter is within
their appropriate range . See the service manual for more details on
this HP-IB only feature .
2276 0222,"Data out of range;CORR:FLA T(2276)"
8-33