Agilent Technologies Auroraduet N1726A, User Manual, Page: 99 / 507

aurora
Duet
- User Guide
3 - 34 422685
Entering a Bearer Capability
Ø Highlight USER NO and, using the LEFT and
RIGHT arrow keys, select the bearer capability
number you wish to edit.
The display toggles between USER 1 , USER 2 , USER 3 ,
USER 4 and USER 5 .
Ø Highlight BEARER CAPABILITY and press SELECT .
EDIT appears at the bottom of the display.
Ø Press F3 EDIT to edit the bearer capability.
The flashing cursor indicates the point where you can
enter the first digit. In edit mode, the function keys
become the six hexadecimal digits:
F1 = A, F2 = B, F3 = C, F4 = D, F5 = E and F6 = F.
Ø Use the keypad to enter digits 0 to 9 and the
function keys to enter hexadecimal digits.
Your entry can be any hexadecimal number in the range
00 to FF . The bearer capability must contain a minimum
of two and a maximum of eleven octets. For example,
98 91 A5 is circuit mode video at 2 x 64kbps H.221/
H.242 coded.
If you make a mistake, press the LEFT arrow to delete
one octet.
Ø Press either the UP or DOWN arrow keys to finish
editing the BEARER CAPABILITY line.
If you have not entered an even number of digits (i.e.
complete octets) aurora
Duet
will not allow you to finish
editing.
If an error is detected
If aurora
Duet
detects an error in the bearer capability you
have entered, the following error screen is displayed:
Chap3s2a.PM6 17/06/99, 09:38 34