Agilent Technologies Auroraduet N1726A, User Manual, Page: 209 / 507

aurora
Duet
- User Guide
4 - 68 422685
Setting up a Channel Test
Both the Outgoing Channel test and Full Channel test are
set up as follows:
Ø Choose OUTGOING CHANNEL TEST or FULL
CHANNEL TEST from the AUTOTEST menu.
A screen similar to the following is displayed:
Selecting the bearer service
First, select the bearer service for the test calls:
Ø Highlight SERVICE and, using the LEFT and
RIGHT arrow keys, choose either DATA UR/64K or
SPEECH .
Performing a BER test
You can perform a BER test on each channel, if you have
chosen the
DATA UR/64K bearer service:
Ø Highlight AUTO BERT and select ON to run a BER
test.
Ø To specify the duration of the BER test, highlight
TEST LENGTH and select 1 minute, 10 minutes, 1
hour or user defined. For details on specifying a
user defined BER test length, see
Setting up BERT
Operation in Section 2 of this Chapter.
Chap4s3.PM6 17/06/99, 09:44 68