Agilent Technologies Auroraduet N1726A, User Manual, Page: 82 / 507

Issue 01 - 06/99 3 - 17
Setting up aurora
Duet
- Section 1
Ø From the ISDN SETUP menu, highlight ENCODING .
Ø Using the RIGHT and LEFT arrow keys, select
either A-LAW or µ-LAW .
Switching CRC4 Error Checking Off/On
You can enable and disable Layer 1 CRC4 checking and
generation, according to the ITU-T G.704 standard. Both
ends of the line must be set the same.
Ø From the ISDN SETUP menu, highlight CRC4 .
Ø Using the RIGHT and LEFT arrow keys, select
either OFF or ON .
Storing a Service Profile Id
A SPID is used by the terminal equipment to identify the
service profile to the network on point to multipoint
connections. The SPID is included as an information
element in outgoing calls.
Note:
When using Spectrum B Stimulus, you must have a stored
SPID value.
To store a 16 digit Service Profile Identifier (SPID) in
aurora
Duet
's memory:
Ø Choose SPID in the DIAL SETUP menu.
Chap3s1.PM6 17/06/99, 09:37 17