manualshive.com logo in svg

Agilent Technologies Auroraduet N1726A, User Manual, Page: 337 / 507

Share
Download
Agilent Technologies Auroraduet N1726A User Manual Download Page 337

aurora

Duet

 - User Guide

7 - 30

422685

You can enter as much information here as you want, the
only restriction being the storage capacity on your PC.
This information is not mandatory, but may prove useful
as a future reference.

Ø

Choose 

Apply 

to save your entries without exiting

the dialog box, or choose 

OK 

to save and exit.

2

Note

When you add a new tester,  Remote Control
automatically uses this as the currently selected tester and
the name is displayed in the title bar of the window.

Selecting a Previously Configured Tester

To select an aurora

Duet 

which you have previously set up

within Remote Control:

Ø

Choose 

File/Open 

to display the 

Select a Tester

dialog box.

This displays a list of all the testers you currently have
configured within Remote Control.

Chap7s2.PM6

17/06/99, 09:51

30

Summary of Contents for Auroraduet N1726A




























































































































































































































































































































































































































































































































Reviews:

No comments