manualshive.com logo in svg

Agilent Technologies Auroraduet N1726A, User Manual, Page: 192 / 507

Share
Download
Agilent Technologies Auroraduet N1726A User Manual Download Page 192

Issue 01 - 06/99

4 - 51

Testing in Simulate Mode - Section 2

Pass/Fail

Indicates whether the BER test has passed
or failed. This is only displayed for timed
BER tests.

If no results are stored in memory, 

NONE AVAILABLE

 is

displayed.

Choosing Absolute or Percentage results

aurora

Duet

 can display BER test results as absolute values

or as percentages. To select how results are displayed:

Ø

Press 

F5 

to toggle between absolute and percentage.

Browsing through the BERT results

To navigate through all the sets of stored BERT results,
use the following function keys:

Ø

To display the previous result, press 

F3

 

<

Ø

To display the next result, press 

F4 

>

.

Printing stored BERT results

To print the currently displayed BERT results:

Ø

Connect aurora

Duet

 to a printer. See 

Connecting

aurora

Duet

 to a PC or Printer

 in Chapter 3 Section 3.

Ø

Press 

F2 

PRN

.

The BERT results are sent to the printer. Results are
printed as both absolute and percentage values.

The following additional information, which is not
visible on the screen, is included in the printout:

Chap4s2.PM6

17/06/99, 09:43

51

Summary of Contents for Auroraduet N1726A




























































































































































































































































































































































































































































































































Reviews:

No comments